TVP2

Features

  • Monitors the performance of a hands free reader
  • Monitors reader detection zone integrity
  • Scrambled RF communication
  • Relay contact to indicate fault conditions
  • Maintenance free

Details

The TVP2 "In Line" Performance Test Tag should be specified in safety critical installations where the continued operation of the reader must to be monitored. Once adjusted the unit provides continual feedback on the status of the reader antenna being monitored. Any reduction in reading range, or probability of detection, is flagged by the internal relay changing state and the LED indicators on the front of the unit. The unit is designed to operate with all Cyphertag aerial units. The RVx reader can address several aerials, each of which must have a TVP2 to monitor each detection field.

The reader checks that each test tag/aerial combination is functioning correctly. If either the test tag or the reader is compromised, an alarm relay will operate. The reader can also generate an alarm report via the Wiegand or Serial output port. The TVP2 test tag can be used with all RVx and RVRx type readers such as the RVR1-(4-2) which have multiple loop aerials. The TVP2 cannot be used with the split transmit and receive version. This unit must be monitored using TVP1 units.

Specification

Specification TVP2 Details
Power requirements 5V DC, (supplied by RV1-RVR1 reader)
Dimensions 117 x 85 x 35mm
Weight 150g
Temperature range -20 to +60°C non condensing
Housing Light grey ABS with Polycarbonate label
LED function RED - TVP2 Power
AMBER - TVP2 Failed
GREEN - TVP2 Scanning
Relay function NO - TVP2 Scanning
NC - TVP2 Failed

Applications

The product is suitable for numerous applications, these include but are not limited to:

  • Full performance monitoring of a hands free Cyphertag readers
  • Key security in prisons
  • Security institutions
  • Safety tracking applications

Ordering Information

Ordered as TVP2.

Technical Details

Download the 1st manual for TVP2.